Contact us: (270) 435-4369 | support@agconnections.com

Articles in this section

Creating Enogen Contracting

Avatar
Trent Murdock
  • Updated
Follow
  • Start by selecting the appropriate seed adviser then search for the grower. Navigate to the + button under the Enogen Contracted column 

mceclip2.png

  • Select the field for contracting on the left and then select the Enogen Contract button

mceclip3.png

  • Storage locations from previous year(s) contracts will appear on the left. If an new location is needed navagate to the + New storage location button

mceclip4.png

  • To create a storage location use the following steps
    1. Name the location
    2. Pick the crop type
    3. Enter in the capacity
      • Grain will need to be entered in Bushels
      • Silage will need to be entered in Tons 
      • Earlage will need to be entered in Tons
      • High Moisture Corn will need to be entered in Tons

mceclip5.png

  • Scroll Down the page
    1. Select "The grower confirms that they have enough available grain storage to contain the yields from the contracted fields, should they miss the silage window" Check box 
    2. Navigate to the storage location on the map, when located single left click on the map to drop a point. If the point needs to be moved another single left click will move the point.
    3. Choose the Save Location button to finish

mceclip6.png

  • Select the newly created or old storage locations on the left and then select the Next: Contract Details button 

mceclip7.png

  • Contract Details
    1. Type in the name of the Grain receiver
      • If it is a Fed on Farm contract the Grain receiver is always Syngenta
      • If it is a Fuel contract type the name of the of the delivery location
    2.  Select the type of contract from the drop down
    3.  Select Contract year

mceclip8.png

  • Scroll down the page 
    1. Enter the plating rate, the planting rate will populate across all selected fields
    2.  Enter the Yield(APH), the Yield (APH) will populate across all selected fields
    3. If different plating rates are need, deselect the "Use the same planting rate for all fields" Box to edit the rates independently
    4. If different Yield (APH) are need, deselect the "Use the Yield (APH) for all fields" Box to edit the rates independently
    5. Toggle the Border Rows toggle on if the the fields need border rows
    6. If the field has been unintentionally selected, deselect it by clicking the X to     
    7. Fields can also be added or detected Under Fields list. 

mceclip9.png

  • Scroll down to storage location
    1. Verify that the correct storage location is selected
    2. Storage locations can be selected or deselected on the left 
    3. Storage locations can also be removed by selecting the X on the right

mceclip10.png

  1. Scroll to the Cattle type section 
    1. Select the appropriate cattle type 
    2. Enter the Cattle Headcount
    3. Review the Estimated Unit Needed and Select Create Contract

mceclip11.png

  • The contract PDF. will be generated verify that it is correct. When the contract has been verified correct select the Review Signers button

mceclip12.png

  • The Growers Phone number will appear, verify that the number will diver to a smart phone.
    • If the number needs to be changed select edit 

mceclip13.png

  • Delete the provided phone number, enter the new number and select the check mark icon  

mceclip14.png

  • Select the Send Contract, this will generate a SMS to the Grower prompting them to log into Growmore360 and sign the contract

mceclip15.png

  • Select OK to return to the map-centric page

mceclip16.png

If you have any questions regarding this content, please reach out to us with the contact information provided below.
Syngenta Digital Support
Phone: (270) 435-4369 - Option 1
Email:  eluminate@agconnections.com
M-TH:  7:00 AM - 6:00 PM CST
F:         7:00 AM - 5:00 PM CST

Related articles